- Steel: ASTM A653/A653M, SQ Grade 40 ,40 ksi (275 MPa) minimum yield strength, 55 ksi (370 MPa) minimum tensile strength, G 60 hot-dipped galvanized coating Steel Sizer Used:
DC – 1700 12 GA angle 14 GA Back Plate
DC – 1500 12 GA angle 12 GA Insert
DC – 1700 12 GA angle Strut and 14 GA Back Plate
DC – 1500 12 GA angle Strut and 12GA Insert
H/VDC 1700 12 GA Slide Base
12 GA angle and 14 GA Back Plate
H/VDC 1500 12 GA Slide Base
12 GA angle and 12 GA Insert
ETTC 1500 14 GA angle and 12 GA Insert
ITTC 450 18 GA angle and 14 GA Insert
- Material design thickness for material used:
12 GA .097 inches (2.46 mm) min.
14 GA .072 inches (1.82 mm) min.
18 GA .043 inches (1.09 mm) min.
