Download Submittal for 1-1/4" Flexible Vinyl Corner Bead

gripSTIK® MAX-Flex® Archway is designed for maximum flexibility as this unique design allows it to conform to almost any radius. MAX-Flex® has “Y”cut slits on the notched flanges allowing maximum flexibility without kinking. Installs easily with nails, staples or spray adhesive adhesion. The specially knurled and perforated flanges allow excellent joint compound. No mud additives or priming are needed prior to painting. Phillips bead is dent resistant, won’t rust in high humidity areas and easy to cut with shears, knife
or fine-tooth hacksaw.

Product Data and Ordering Information:
Material: Extruded rigid vinyl; contains no asbestos
Dimensions: 1-1/4” leg x 1-1/4” leg
Part Number: CBAVYL
Length: 10'

Special Notes:
LEED Credits for Recycled Content
MR2 – The steel and vinyl used in Phillips Manufacturing products is 100% recyclable.
MR4 – Phillips Manufacturing steel and vinyl products have a minimum of:
Total recycled content: 30%
Post-consumer recycled content: 25%
Pre-consumer recycled content: 5%

ASTM and Code Standards:
Phillips gripSTIK® MAX-Flex® 3/4" Bullnose Archway meets or exceeds:
• ASTM C 1047 Standard Specification for Accessories for GypsumWallboard
• ASTM D 1784 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC)
• Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds
• ASTM D 3678 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC)
Interior- Profile Extrusions
SDS and other technical information available at www.phillipsmfg.com

Download Submittal for 1-1/4" Vinyl Corner Bead

gripSTIK® Corner Bead provides rigid protection for the exposed edges of wallboard. This easy-to-install 90° corner support can be nailed, stapled or
applied with spray adhesive. The specially knurled and perforated flanges allow excellent joint compound adhesion. No mud additives or priming are
needed prior to painting. Phillips bead is dent resistant, won’t rust and easy to cut with shears, knife or fine-tooth hacksaw.

Product Data and Ordering Information:
Material: Extruded rigid vinyl; contains no asbestos
Dimensions: 1-1/4” leg x 1-1/4” leg
Part Number: CBRVYL
Lengths: 8', 10'

Special Notes:
LEED Credits for Recycled Content
MR2 – The steel and vinyl used in Phillips Manufacturing products is 100% recyclable.
MR4 – Phillips Manufacturing steel and vinyl products have a minimum of:
Total recycled content: 30%
Post-consumer recycled content: 25%
Pre-consumer recycled content: 5%

ASTM and Code Standards:
Phillips gripSTIK® Vinyl Corner Bead meets or exceeds:
• ASTM C 1047 Standard Specification for Accessories for GypsumWallboard
• ASTM D 1784 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC)
• Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds
• ASTM D 3678 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC)
Interior- Profile Extrusions
SDS and other technical information available at www.phillipsmfg.com

Download Submittal for 1/2" Vinyl J-Trim

gripSTIK® 1/2" Vinyl J-Trim provides a finished edge at door and window openings along with other various wallboard intersections. No joint compound is required for this impact resistant trim. Easy to cut with shears, knife or finetooth hacksaw. Won’t rust.

Product Data and Ordering Information:
Material: Molded copolymer; contains no asbestos
Part Number: JT5VYL
Length: 10'

Special Notes:
LEED Credits for Recycled Content
MR2 – The steel and vinyl used in Phillips Manufacturing products is 100% recyclable.
MR4 – Phillips Manufacturing steel and vinyl products have a minimum of:
Total recycled content: 30%
Post-consumer recycled content: 25%
Pre-consumer recycled content: 5%

ASTM and Code Standards:
ASTM and Code Standards
Phillips gripSTIK® 1/2" Vinyl J-Trim meets or exceeds the following ASTM Standards:
• ASTM C 1047 Standard Specification for Accessories for GypsumWallboard
• ASTM D 1784 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC)
Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC)Compounds
• ASTM D 3678 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Interior-Profile Extrusions
SDS and other technical information available at www.phillipsmfg.com

Download Submittal for 1/2" Vinyl L-Trim

gripSTIK® 1/2” Vinyl L-Trim provides a sharp edge at door, window, ceiling and other terminations. The many perforations and raised shoulder enhance strong compound adhesion and provide a flush finish. No primer is required for this impact resistant trim. Easy to cut with shears, knife or fine-tooth hacksaw. Won’t rust.

Product Data and Ordering Information:
Material: Extruded rigid vinyl; contains no asbestos
Part Numbers: LT5VYL
Length: 10'

Special Notes:
LEED Credits for Recycled Content
MR2 – The steel and vinyl used in Phillips Manufacturing products is 100% recyclable.
MR4 – Phillips Manufacturing steel and vinyl products have a minimum of:
Total recycled content: 30%
Post-consumer recycled content: 25%
Pre-consumer recycled content: 5%

ASTM and Code Standards:
Phillips gripSTIK® MAX-Flex® 3/4" Bullnose Archway meets or exceeds:
• ASTM C 1047 Standard Specification for Accessories for GypsumWallboard
• ASTM D 1784 Standard Specification for Rigid Poly (Vinyl Chloride)
(PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds
• ASTM D 3678 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC)
Interior- Profile Extrusions

SDS and other technical information available at www.phillipsmfg.com

Download Submittal for 1/2" Vinyl L-Trim Tear Strip

gripSTIK® 1/2" Vinyl L-Tear Strip provides a clean line at a variety of wallboard intersections. The tear-off strip provides a protective edge and a guide for drywall finishing knives. Once joint compound is applied, finished and painted, the tear-off strip is removed to form a clean, crisp edge. Won’t rust and impact resistant. Easy to cut with shears, knife or fine-tooth hacksaw.

Product Data and Ordering Information:
Material: Extruded rigid vinyl; contains no asbestos
Part Numbers: TS5VYL
Lengths: 8', 10'

Special Notes:
LEED Credits for Recycled Content
MR2 – The steel and vinyl used in Phillips Manufacturing products is 100% recyclable.
MR4 – Phillips Manufacturing steel and vinyl products have a minimum of:
Total recycled content: 30%
Post-consumer recycled content: 25%
Pre-consumer recycled content: 5%

ASTM and Code Standards:
Phillips gripSTIK® 1/2" Vinyl L-Tear Strip meets or exceeds the following ASTM
Standards:
• ASTM C 1047 Standard Specification for Accessories for Gypsum
Wallboard
• ASTM D 1784 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC)
Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC)Compounds
• ASTM D 3678 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC)
Interior-Profile Extrusions

SDS and other technical information available at www.phillipsmfg.com

Download Submittal for 3/4" Bullnose Vinyl Corner Bead

gripSTIK® 3/4” Bullnose creates a smooth, rounded look to drywall corners. This easy-to-install 90° corner support can be nailed, stapled or applied with spray adhesive. The specially knurled and perforated flanges allow excellent joint compound adhesion. No mud additives or priming are needed prior to painting. Phillips bead is dent resistant, won’t rust and easy to cut with shears, knife or fine-tooth hacksaw.

Product Data and Ordering Information:
Product Data and Ordering Information Material:
Extruded rigid vinyl; contains no asbestos
Dimensions: 7/8” leg x 7/8” leg, 3/4" radius
Part Number: BN3VYL

Special Notes:
LEED Credits for Recycled Content
MR2 – The steel and vinyl used in Phillips Manufacturing products is 100% recyclable.
MR4 – Phillips Manufacturing steel and vinyl products have a minimum of:
Total recycled content: 30%
Post-consumer recycled content: 25%
Pre-consumer recycled content: 5%

ASTM and Code Standards:
Phillips gripSTIK® 3/4" Bullnose meets or exceeds:
•ASTM C 1047 Standard Specification for Accessories for GypsumWallboard
•ASTM D 1784 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC)
Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC)Compounds
•ASTM D 3678 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Interior-Profile Extrusions

SDS and other technical information available at www.phillipsmfg.com

gripSTIK® MAX-Flex® 3/4” Bullnose Splay unique design allows for maximum flexibility allowing it to conform to almost any radius creating a smooth, rounded look to drywall corners. This easy-to-install 90° angle corner support can be nailed, stapled or applied with spray adhesive. The specially knurled and perforated flanges allow excellent joint compound adhesion. No mud additives or priming are needed prior to painting. Phillips bead is dent resistant, won’t rust and easy to cut with shears, knife or fine-tooth hacksaw.

Product Data and Ordering Information:
Material: Extruded rigid vinyl; contains no asbestos
Dimensions: 7/8” leg x 7/8” leg, 3/4" radius
Part Number: BA3VYL
Length: 10'

Special Notes:
LEED Credits for Recycled Content
MR2 – The steel and vinyl used in Phillips Manufacturing products is 100% recyclable.
MR4 – Phillips Manufacturing steel and vinyl products have a minimum of:
Total recycled content: 30%
Post-consumer recycled content: 25%
Pre-consumer recycled content: 5%

ASTM and Code Standards:
Phillips gripSTIK® MAX-Flex® 3/4" Bullnose Archway meets or exceeds:
• ASTM C 1047 Standard Specification for Accessories for GypsumWallboard
• ASTM D 1784 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) CPVC) Compounds
• ASTM D 3678 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC)

SDS and other technical information available at www.phillipsmfg.com

kwikSTIK® Paper-Faced P2 tape-on inside corner trim is designed to form a true inside (90°) corner. Features over 50% thicker steel than ASTM standard C1047 minimum requirement for a strong, durable inside corner. The rigid steelreinforced corner is covered with a unique, high strength paper providing maximum strength and protection while preventing cracking caused by the movement or shrinkage of framing members. Install by pressing firmly into joint compound and removing excess compound with a drywall knife or clean rag.

Product Data and Ordering Information:
Material: 0.040 min thickness, minimum G40
Part Number: PIC14EGB
Length: 10'

Special Notes:
LEED Credits for Recycled Content
MR2 – The steel and vinyl used in Phillips Manufacturing products is 100% recyclable.
MR4 – Phillips Manufacturing steel and vinyl products have a minimum of:
Total recycled content: 30%
Post-consumer recycled content: 25%
Pre-consumer recycled content: 5%

ASTM and Code Standards:
Phillips kwikSTIK® Paper-Faced Tape-On Metal Inside Corner Trim meets or exceeds:
- ASTM C1047 Standard Specification for Accessories for GypsumWallboard*
- ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized)
or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
SDS and other technical information available at www.phillipsmfg.com

Download Submittal for Paper-faced Metal Corner Bead

kwikSTIK® Paper-Faced Tape-On Metal Corner Bead Super Wide features wider flanges for more complete coverage. The product is essentially the same as P1 Deluxe Super Wide except P1 Super Wide utilizes slightly lighter steel making it a more economical product. Used on 90° outside corners with any standard drywall thickness for straight, precise corners. The rigid steel- reinforced corner is covered with a unique, high strength paper providing maximum strength and protection while preventing cracking caused by the movement or shrinkage of framing members. Install by pressing firmly into joint compound and removing
excess compound with a drywall knife or clean rag.

Product Data and Ordering Information:
Material: 0.010 min thickness, minimum G40
Part Number: PSW10EGB
Length: 8', 10'

Special Notes:
LEED Credits for Recycled Content
MR2 – The steel and vinyl used in Phillips Manufacturing products is 100% recyclable.
MR4 – Phillips Manufacturing steel and vinyl products have a minimum of:
Total recycled content: 30%
Post-consumer recycled content: 25%
Pre-consumer recycled content: 5%

ASTM and Code Standards:
All Phillips kwikSTIK® Paper-Faced Tape-On Metal Corner Beads meets or exceeds the following ASTM standards except this product utilizes slightly lighter steel that does not meet ASTM standard C1047. However, this product meets all other applicable ASTM standard requirements:
- ASTM C1047 Standard Specification for Accessories for GypsumWallboard*
- ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process

SDS and other technical information available at www.phillipsmfg.com.