Download Submittal for Joist Bridle Hangers
Joist hangers are installed over the top of beams or girders. Top flanges may be welded to steel support beams, or bolted/shot/pinned to other substrates. Tests of joist hangers are based on welded top flange connections. Web crippling of the joist members must be independently verified. Shallow joist hangers are available with (3) pre-punched holes each tab. When attached over cold-formed steel (CFS) girder members with minimum 2.5” flanges, use (3) screws or pins in each top tab for connection to girder.
Product Data and Ordering Information:
Standard bridle style joist hangers are made for the end support of Super Stud joist members with flanges up to 2” wide. Custom hangers are available for multiple members or larger flanges.
Available depths: 6”, 8”, 10”, 12”
Available widths: 2” (standard: for SSC, SSJ, AND SJW members) 4” for double members; custom widths also available
Strip width: 2” minimum
End bearing for joists: 2” (with joist fully seated)
Thickness:
Minimum thickness = 0.0966” (12 gauge)
Yield Strength: 50 kips per square inch (KSI) minimum
ASTM and Code Standards:
Joist hangers are galvanized in accordance with ASTM A653. Steel complies with ASTM A1003 for chemical composition and
coating. Properly constructed assemblies comply with ASTM C1007.